With the continuous development of the architectural decoration industry, more and more new materials are being applied to architectural decoration. 1.5mm aluminum veneer, as a new type of building material, has become a new choice in the construction decoration industry due to its excellent decorative and construction performance.

1、 Characteristics of 1.5mm aluminum veneer

1. Lightweight: The weight of 1.5mm aluminum veneer is lighter than traditional building materials, which can reduce the weight of buildings and lower their energy consumption.

2. Corrosion resistance: The surface of 1.5mm aluminum veneer has undergone anodizing treatment, which has strong corrosion resistance and oxidation resistance, and can extend its service life.

3. Good sound insulation effect: 1.5mm aluminum veneer has good sound insulation effect, which can effectively reduce the impact of noise on indoor environment.

4. Good fire resistance: 1.5mm aluminum veneer has good fire resistance and can provide certain protection in the event of a fire.

2、 Application range of 1.5mm aluminum veneer

1. Building curtain wall: 1.5mm aluminum veneer can be used as one of the main materials for building curtain walls, and is used for decoration of exterior walls, balconies, windows, and other parts.

2. Interior decoration: 1.5mm aluminum veneer can be used as one of the main materials for interior decoration, for the decoration of walls, ceilings, partitions and other parts.

3. Billboard: 1.5mm aluminum veneer can be used as one of the main materials for outdoor billboard production.

3、 Construction method of 1.5mm aluminum veneer

1. Measurement and laying out: Accurate measurement and laying out of the building are required before construction to ensure the accurate installation position and angle of the 1.5mm aluminum veneer.

2. Keel installation: Install the keel inside the building and fix it on the wall or ceiling as a support structure for 1.5mm aluminum veneer.

Installation of 3.1.5mm aluminum veneer: Unfold the 1.5mm aluminum veneer according to the design requirements, and then install it on the keel by lifting. It should be noted that during the installation process, the angle and position of the 1.5mm aluminum veneer must be accurate and correct.

4. Seam treatment: After installation, it is necessary to perform seam treatment on the 1.5mm aluminum veneer to ensure its flatness and aesthetics. Joint treatment can be carried out using specialized joint glue or sealant.

4、 Precautions

When selecting and using 1.5mm aluminum veneer, the following points should be noted:

1. Accurate measurement and layout of the building are required before construction;

During the installation process, attention should be paid to protecting the surface of the 1.5mm aluminum veneer to avoid damage caused by scratches or collisions;

3. Clean the surface of 1.5mm aluminum veneer in a timely manner during maintenance to maintain its beauty and durability;

4. During the construction process, attention should be paid to safety and relevant safety regulations and operating procedures should be followed.