Switch language:简体中文 | English
National Consultation Hotline:+86 15627778610
铝单板厂家
铝单板厂家

Industry information

Industry information

What is the installation process of fluorocarbon aluminum veneer?

Source: http://www.gd-jinba.com/xingyezixun/show-813.htmlAuthor: Aluminum TripodTime: March 19, 2025 06:24:59

氟碳铝单板的安装流程是怎样的?



Fluorocarbon aluminum veneer is a very popular building material, and its installation process is also very important. The correct installation process can ensure the flatness, verticality, and firmness of fluorocarbon aluminum veneer, thereby ensuring the overall aesthetics and service life of the building. Below is a detailed introduction to the installation process of fluorocarbon aluminum veneer.

1、 Preparation work

Before installing fluorocarbon aluminum veneer, the following preparations need to be made:

1. Check the quality of fluorocarbon aluminum veneer to ensure that there are no obvious scratches, dents, or other issues on the surface;

2. Check the environment of the construction site to ensure that the ground is flat and free of debris, etc;

3. Prepare necessary tools and materials, including drills, hammers, screwdrivers, level gauges, corner codes, etc.

2、 Measurement and positioning

Before installing fluorocarbon aluminum veneer, it is necessary to measure and position it first. The specific steps are as follows:

1. Determine the position and quantity of fluorocarbon aluminum veneer according to the design drawings;

2. Use a spirit level to measure the level of the ground and mark the installation position of the fluorocarbon aluminum veneer on the ground;

3. Use corner brackets to fix the fluorocarbon aluminum veneer on the ground and adjust its levelness and verticality.

3、 Install the keel frame

After completing the measurement and positioning of fluorocarbon aluminum veneer, it is necessary to start installing the keel frame. The specific steps are as follows:

1. Determine the quantity and position of the keel frame according to the design drawings;

2. Drill holes on the ground according to the design drawings and fix the dragon skeleton on the ground;

3. Use a spirit level to check the levelness and verticality of the keel frame, and make necessary adjustments.

4、 Install fluorocarbon aluminum veneer

After completing the installation of the keel frame, the installation of fluorocarbon aluminum veneer can begin. The specific steps are as follows:

1. Place the fluorocarbon aluminum veneer on the keel frame according to the requirements of the design drawings;

2. Use a screwdriver to fix the fluorocarbon aluminum veneer on the keel frame, and be careful not to damage the fluorocarbon coating;

3. Use a level to check the flatness and verticality of fluorocarbon aluminum veneer, and make necessary adjustments.

5、 Closing work

After completing the installation of fluorocarbon aluminum veneer, some finishing work is still needed. The specific steps are as follows:

1. Clean and protect the surface of fluorocarbon aluminum veneer to prevent damage from dust and stains;

2. Carry out anti-corrosion treatment on the dragon skeleton to extend its service life;

3. Clean and organize the construction site to ensure a clean and orderly construction environment.

The installation process of fluorocarbon aluminum veneer includes preparation work, measurement and positioning, installation of keel frame, installation of fluorocarbon aluminum veneer, and finishing work. Only by strictly following these steps can the flatness, verticality, and firmness of fluorocarbon aluminum veneer be ensured, thereby ensuring the overall aesthetics and service life of the building.


National Consultation Hotline: +86 15627778610